Factory Direct Sale 110V 100A Solar Controller for PV System
|FOB Price:||US $352 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $352/ Piece|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: YSP110100
- Certification: ISO, CE
- Rated Voltage: 110V
- Transport Package: Carton
- Condition: New
- Application: Collector Controller, Solar System Controller, Charger Controller, Solar Working Station, Voltage Controller
- Trademark: YINSUN
- Origin: Guangzhou, Guangdong
Step 1: Choose Mounting Location
Locate the YSP series controller on a vertical surface protected from direct sun, high temperature, and water.
Step 2: Unpacking and inspection
Receive the goods before unpacking, please first check whether the packing breakage or deformation, and then open the packing cases, remove the controller, which should include a controller, a specification, and annex, if there are any missing, please contact our company. Check receive the controller should be no stains, no damage or fall, if have the above
situation, please contact our company.
Step 3: Select installation
YSP series controller can be installed horizontally, or hung up vertically. If choose horizontal installation, you can directly install the controller is placed on the stage, and ignore this step; If choose vertical installation, remove attachments, to reverse its horizontal, as shown in the figure below, the attachment is installed this controller.
Place the controller in the location where it will be mounted. Verify that there is sufficient room to run wires and that there is sufficient room above and below the controller for air flow.
Step 4:Mark Holes
Use a pencil or pen to mark the eight (8) mounting hole locations on the mounting surface.
Step 5: Drill Holes
Remove the controller and drill 8 size able holes in the marked locations.
Step 6: Secure Controller
Place the controller on the surface and align the mounting holes with the drilled holes in step 5. Secure the controller in place using the mounting screws.
If the controller meet these problems as below, please solve them according to the suggestion.
|When there is sun on the PV modules, and the red charging indicator don't light.||Battery is full charging or the PV array connection is open||First please check that if the battery is full charging. The indicator will not light if the battery is full charging. Then please check if the internal connection of PV modules and battery is correct and reliable.|
|The green indicator is not light||The battery is under voltage||When the battery is back to normal, the green light will auto recovery.|
|The green indicator flash||The battery is under voltage||When the battery is fully charged, the green light will auto recovery.|
The charge controller is warranted to be free from defects for a period of TWO (2) years from the date of shipment to the original end user. We will, at its option, repair or replace any such defective products.
This warranty does not apply under the following conditions:
1. Damage by accident, negligence, abuse or improper use.
2. PV or load current exceeding the rating of product.
3. Unauthorized product modification attempted repair.
4. Damage occurring during shipment.
5. Damage results from acts of nature such as lightning, weather extremes.
6. Irreclaimable mechanical damage.
Our Services ( Pre-service /After-sales service)
Please send us an email if you have any queries or comments regarding our service and products. We will try very best to answer your questions as soon as possible.
1. Respond as Soon as Possible
2. Keep Clients Updated
3. Go the Extra Mile
4. Fix Your Mistakes
5.24 hours online
6. Keep Promises
7. Don't Confuse Clients with Jargon
8. Be Patient
9. Know Everything we Need to Know